I. What is the Pitch?

 

Pitch means the distance between the center points of two adjacent pole,

Here is the normally pitch : such as 7.62mm, 9.5mm, 11.0mm, 13.0mm, and 15.0mm.

 

In isolated HOMNECKS screw terminal blocks, HONG YI ELECTRONIC pitch determines the insulation distance between HOMNECKS terminal blocks,the current carrying capacity, installation space layout, and safety certification standards.

 

II. Why is Pitch Crucial for High-Current Applications?

 

1. Creepage Distance and Electrical Safety:

  larger pitch means bigger physical distance, for terminal block,HONG YI ELECTRONIC help product to improve creepage distance and clearance, reducing the risk of short circuits.

 

2. HONG YI ELECTRONIC Determines Current Carrying Capacity: A larger pitch typically means thicker copper components and stronger contact pressure, thus supporting higher currents.

 

3. HONG YI ELECTRONIC Affects Heat Dissipation and Long-Term Reliability: A suitable pitch helps dissipate heat, reduces temperature rise, and extends product life.

 

4.Affects Overall Equipment Layout Design: HONG YI ELECTRONIC Pitch directly affects the space utilization of the control cabinet, PCB size, and mounting hole layout.

 

III. Typical Current Ranges for Different Pitches

 

7.62mm: 20A–30A

 

9.5mm: 30A–50A

 

11.0mm: 50A–75A

 

13.0mm and above: 75A–150A

 

Actual selection needs to be confirmed based on specific structural design and material specifications.

 

 

 

IV. Engineering Selection Recommendations

 

Step 1: Confirm the maximum continuous current.

 

Step 2: Confirm the system voltage level.

 

Step 3: Assess environmental factors (humidity, dust, vibration).

 

Step 4: certification  (UL, CE, etc.).

 

 

 

V. Common Misconceptions in B2B Procurement

 

• Focusing only on price while ignoring pitch

 

• Considering only rated current while ignoring temperature rise

 

• Ignoring the impact of long-term load

 

• Failing to calculate installation space

 

 

VI. Summary

Pitch is not only a structural dimensional parameter, but also a key indicator of electrical safety, heat dissipation performance, and system reliability.

 

For our customer, HONG YI ELECTRONIC choosing the right pitch to reduce after-sales risks, improve product stability, and enhance market competitiveness.

 

 Terminal Block Overheating: What Causes It and How to Fix It

 

Overheated terminal blocks can cause stuff to break down or even spark a fire. This article will tell you why terminal blocks get too hot and what you can do to keep your electrical stuff safe and working like it should.

 

 Why Should You Care About Overheating?

 

Terminal blocks are super important for connecting wires in places like control panels for factories, power systems, and automated production lines. If they overheat, it usually happens slowly, which can lead to bigger problems down the road.

 

 What Makes Them Overheat?

 

1. Loose Wires:

 

If the wires aren't in tight, or if they're not prepped right, there's more resistance, and that means more heat.

 

What to Do:

 

•   Make sure everything is tightened just right.
•   For machines that vibrate a lot, use spring-type terminals.
•  Strip the wires to the right length.
•  Check the connections every so often, especially for important circuits.

 

2. Too Much Electricity:

 

Terminal blocks can only handle so much power but that's usually when everything's perfect. Things like how hot it is and how close everything is packed together can change how much power a terminal block can really handle.

 

What to Do:

 

•   Don't put as much power through the terminal block as it's rated for.
•   Make sure the air flows well in the control box.
•   Don't cram the terminals super close to each other.

 

   Use bigger terminals.

 

3. Cheap Parts:

 

If the copper's not good, the coating is too thin, or the stuff around the wires doesn't resist fire, the terminal block won't move electricity well and can rust fast. This means it's more likely to overheat.

 

What to Do:

 

•   Use good copper or copper with a tin coating.
•   Use wire insulation that can resist fire.
•   Get stuff that's been approved by UL, CE, or RoHS.

 

 How to Tell If Something's Overheating:

 

•  Use a heat sensor to look for hot spots.
•  Check if the connections are tight.
•  Watch how much power is going through.
•  Look for any weird colors or burn marks on the terminals.
•  Keep track of when you do maintenance on the equipment.

 

If you set things up right, use enough power margin, and use good parts, you can avoid equipment failing, lower safety risks, and keep your electrical systems running well for a long time.